Chicago Trading Post III

Selling a polished dual 3" GN1 exhaust. An awesome exhaust for our cars, nothing looks and sounds better. Only getting rid of it so that I can put my car on a diet and get creative with how I route my exhaust by the fender.

Comes with the main cat back pipes, mufflers, tail pipes, (4) band clamps along with (2) turn-downs in case for whatever reason you don't want to run tail pipes.

Couple quick things:

The right tail-pipe does have a small ding in it, just through putting it on and off a few times. Also, the right tail pipe has a bracket that goes into the factory slip in exhaust hanger. For some reason, that bracket is a little off. This is how I received the exhaust. I was able to get it into the factory hanger but it might need a little heat and adjustment, or just some good wiggling as I did. I just left it as is as it worked fine for me. Lastly there is some of the exhaust adhesive on the muffler ends for sealing the band clamps, totally just reusable.

Retails for $735 if you include band clamps, selling for $500+ shipping if needed but prefer a local sale in Chicago.View attachment 275743 View attachment 275744 View attachment 275745 View attachment 275746 View attachment 275747
Selling a polished dual 3" GN1 exhaust. An awesome exhaust for our cars, nothing looks and sounds better. Only getting rid of it so that I can put my car on a diet and get creative with how I route my exhaust by the fender.

Comes with the main cat back pipes, mufflers, tail pipes, (4) band clamps along with (2) turn-downs in case for whatever reason you don't want to run tail pipes.

Couple quick things:

The right tail-pipe does have a small ding in it, just through putting it on and off a few times. Also, the right tail pipe has a bracket that goes into the factory slip in exhaust hanger. For some reason, that bracket is a little off. This is how I received the exhaust. I was able to get it into the factory hanger but it might need a little heat and adjustment, or just some good wiggling as I did. I just left it as is as it worked fine for me. Lastly there is some of the exhaust adhesive on the muffler ends for sealing the band clamps, totally just reusable.

Retails for $735 if you include band clamps, selling for $500+ shipping if needed but prefer a local sale in Chicago.View attachment 275743 View attachment 275744 View attachment 275745 View attachment 275746 View attachment 275747
How old is it? Still available?
 
Sold my 1987 GN due to health issues and have the following new and used parts for sale. I am located in Sparta, IL.
New Parts:
Gas line filter Offer Part # FF3504
Fel-Pro Cylinder Head Bolt set Offfer Part # ES74022
Fel-Pro Exhaust Manifold Gasket Set Offer Part # MS 90508
KIRBAN CUSTOM CUT PLUG WIRES $50.00 PLUS RIDE
Used Parts:
Master cylinder and high pressure lines for Hydro Boost. Offer
Stock GM knock sensor used Offer
Set of stock heads off 1987 GN. Offer
Stock O2 sensor Offer

Will PM pictures if interested. Thanks Doug
ALL PARTS ARE NOW FREE FOR PICKUP WITH EXCEPTION OF THE PLUG WIRES. IF NOT PICKED UP BY END OF JUNE GOING TO SALVAGE YARD. I LIVE IN SPARTA,IL. 62286
 
1) I have an 8.5 10 bolt in my garage that I want to get rid of to free up some funds.

Looking for $1000 obo, picked up in Carpentersville. I have a truck and can deliver within reason if we work out a deal on delivery.

It has C-Clip Eliminators, I believe moser street axles (28 spline) will confirm stud thread pattern (either M12x1.5 or 1/2"), factory rear cover, 3.42 gears and I'm told a Mini-Spool. I have a set of HR Parts Bushings that will go with it and can be installed on request (I have the tool). I will pull the cover and confirm the guts.

It will also come with fresh rear brake hardware including cylinders, and a set of aluminum drums. The parking brake cables are there, but cut. I never personally ran this rear end.

2) I also have a complete weld in rear coil over setup, with brackets to the rear housing, a tube crossmember to go between frame rails, and single adjustable QA1 shocks. 3 sets of springs which should be the right rates for a Regal.

Looking for $400 for all of that stuff, very good deal compared to what I paid to get it all. Also picked up since it is heavy.

Photos on request.

Let me know if interested,
-Dennis
630.432.7678
 
3) SOLD SOLD SOLD I also have a 3" internal gate Downpipe with test pipe. $450 obo, plus shipping if it needs to go somewhere. Believe this is either a Terry Houston, or an ATR. It is in great shape, and has a good looking exhaust wrap job on it (done by me of course) to keep down some underhood heat. Little dent in one section, now hidden by wrap. The wrap is painted with silicone paint and is in good shape. Ran in the 10s with this.

As I uncover more stuff I want to get rid of, I'll let you guys know first.

-D
 
Last edited:
1) I have an 8.5 10 bolt in my garage that I want to get rid of to free up some funds.

Looking for $1000 obo, picked up in Carpentersville. I have a truck and can deliver within reason if we work out a deal on delivery.

It has C-Clip Eliminators, I believe moser street axles (28 spline) will confirm stud thread pattern (either M12x1.5 or 1/2"), factory rear cover, 3.42 gears and I'm told a Mini-Spool. I have a set of HR Parts Bushings that will go with it and can be installed on request (I have the tool). I will pull the cover and confirm the guts.

It will also come with fresh rear brake hardware including cylinders, and a set of aluminum drums. The parking brake cables are there, but cut. I never personally ran this rear end.

2) I also have a complete weld in rear coil over setup, with brackets to the rear housing, a tube crossmember to go between frame rails, and single adjustable QA1 shocks. 3 sets of springs which should be the right rates for a Regal.

Looking for $400 for all of that stuff, very good deal compared to what I paid to get it all. Also picked up since it is heavy.

Photos on request.

Let me know if interested,
-Dennis
630.432.7678

Bump, open to offers on these things. Tell your friends
 
-SOLD!-

Brand new RJC 4" Exhaust.
Never Ran! $550 Local Sale.

Pic of an identical system installed on my car.
The system up for sale is currently boxed up and ready.

image.jpg
 
Last edited:
I bumped up to the top of the For Sale thread a pair of aftermarket GN rims and tires. Used under 200 miles, perfect and complete with center caps and lug nuts. I have a trip to Chicago coming up so I could bring along. Let me know if anyone's interested.
 
Stock intercoooler shroud - $50
RJC large Puck - $45 - SOLD
Steering Wheel - $40
6265 .85 coated exhaust housing - $150
Chrome turbo shield - $40 - SOLD
3" intake with filter and 3"- 4" hose adapter - $50 - SOLD
Stock Location Fuel Cell with Bladder - $500
MOOG Idler Arm - $20
Welded Belt Tensioner Bracket - $40
10" NLU 3000 stall convertor (unknown brand) - Make Offer
Stock Upper and lower control arms - Make offer
Shitty upper door panels - Make Offer

All prices are picked up, but I'm all over the fringin place for work so I can deliver or meet half way in most cases.
 

Attachments

  • IMG_20170918_182455124.jpg
    IMG_20170918_182455124.jpg
    4.2 MB · Views: 143
  • IMG_20170918_182656280.jpg
    IMG_20170918_182656280.jpg
    3.2 MB · Views: 143
  • IMG_20170918_183111676.jpg
    IMG_20170918_183111676.jpg
    5.6 MB · Views: 134
  • IMG_20170918_183120890.jpg
    IMG_20170918_183120890.jpg
    5 MB · Views: 135
  • fuel cell a.jpg
    fuel cell a.jpg
    59.9 KB · Views: 118
  • IMG_20170919_165348624.jpg
    IMG_20170919_165348624.jpg
    4.2 MB · Views: 115
  • IMG_20170919_165344741.jpg
    IMG_20170919_165344741.jpg
    5 MB · Views: 120
  • IMG_20170919_165526135_TOP.jpg
    IMG_20170919_165526135_TOP.jpg
    5.8 MB · Views: 140
Last edited:
Top