Dont have pixs yet...but I deleted the factory air box,deleted the plate under it(black metal),used a hole saw and punched a 3.5 inch diameter hole under where the plate goes.If the plate were to be put back on...you couldnt see the hole.
I then got a 3 inch exhuast pipe turndown 45 degree and put that through the hole.Mounted my K&N under the front fender,relocated the vacuum ball under there,and mounted my cannister under the washer bottle.As a matter of fact my SMC alky kit fit perfect where the charcaol cannister use to be.
Secured the filter by drilling a couple of self tapping screws into its rubber from the top and used some thin rubber to prevent any metal-metal contact around the hole.
On top of that turndown,I attached my factory 90 degree elbow with the ATS on it,and attached the MAF to that..just like factory.
Julio