tim87tr
Obsession or Digression?
- Joined
- Sep 19, 2001
I have read the info on the maxeffort site and searched on this board for info. I am considering purchasing this fuel management system. I have an '87 GN in which I have installed 38# inj, THDP, 2.5" exh, MM boost control, (stock turbo and IC). My stock MAF seemed to be acting up, 71k miles, and I borrowed a friends LS1 and translator, the car runs great with this. I had considered purchasing the LS1 MAF, but thought maybe I could put this money towards the maxeffort instead.
It sounds to me like since it is run open loop, I can use the 255 lock on the MAF at WOT. I will only go to the track a couple times a year but I do like to use race gas to run more boost on the street, and I hate killing the O2 sensors-therefore the maxeffort consideration. I have not found any high octane unleaded locally. I am also very interested in the SMC alky kit, as this may apply to my maxeffort questions. I use the scanmaster to tune.
My questions:
1) Does the maxeffort come with some sort of MAF sensor? Kind of sounds like I should use the stock one and remove all the screens.
2) Replaces the need to have any other race chip, alky chip, etc., right?
3) For SMC users, does it work well with this? Have you used the wg solenoid wires to trigger the alky pump?
Thanks
It sounds to me like since it is run open loop, I can use the 255 lock on the MAF at WOT. I will only go to the track a couple times a year but I do like to use race gas to run more boost on the street, and I hate killing the O2 sensors-therefore the maxeffort consideration. I have not found any high octane unleaded locally. I am also very interested in the SMC alky kit, as this may apply to my maxeffort questions. I use the scanmaster to tune.
My questions:
1) Does the maxeffort come with some sort of MAF sensor? Kind of sounds like I should use the stock one and remove all the screens.
2) Replaces the need to have any other race chip, alky chip, etc., right?
3) For SMC users, does it work well with this? Have you used the wg solenoid wires to trigger the alky pump?
Thanks