R

Profile posts Latest activity Postings About

  • I currently have a smc alky kit (1 nozzle) found out today the pump is leaking pretty bad on the bottom seal. Would I be able to purchase your pump and run it with the smc system or do I have to switch over to razor completely
    I have an UGLY Charcoal backround with yellow members letters and dark gray messages that I can't read any longer. Getting up there in age and I need a better color combinations on the site. Have emailed a couple of guys like Nick but have never received a reply, that's why I don't come here much any longer. CAN"T READ the darn threads.
    Mi socio...
    Greetings and Salutations ! Long time no speak ! Hope you and yours are doing well !
    Need HELP, Need to change the colors on my page at Turbobuick.com, who from the board can help ?
    Just wanted to says thanks i ordered a pump from you Wednesday and received it Friday and it is working great i appreciate the fast service and great help
    I just became a member and noticed we are neighbors...hope to meet up one day in the near future...
    Hi, I just recent purchased a kit from you, and am wondering if you still have horizontal decals available for the alky controller?
    R
    Razor
    Yes, have decals. Email me better. idoxlr8_70@yahoo.com
    Thats not an awesome deal. they more than double their investment. plastic tank, pump, chinese controller, and some plastic line.
    i just wanna say thanks for the alky kit, i finished hooking it up sunday and cruised it around and is working perfectly and feels amazing with zero knock at all, thanks again!
    As part of preventative maintenance, I ran a leak/pressure test with one of those pressure tests you used to sell (maybe you still do?). Detected a pretty significant leak at the inline filter fittings. Snugged the fittings up and no more leak for now. Looks like the sealant has gotten old and crusty after all these years. I'm going to take it apart and reseal the threads. Looks like you used teflon paste?
    HI JULIO

    I HAVE A X275 GN. I AM GOING E85R NEXT YEAR. I WAS THINKING ABOUT A NOZZLE AT THE COMP HOUSING
    AND RUNNING NO INTERCOOLER TO SAVE WEIGHT. JUST LOOKING FOR AIR CHARGE COOLING DO YOU
    THINK THIS WILL WORK AT HIGH BOOST.ILL ZAHER

    THANKS
    BILL ZAHER
    Hi Razor, am installing one of your older Alky Control units n a friend's GN who is color blind. The on light turning red to green cannot be detected by him. How do I wire two LEDs into the circuit for two individual lights into the twisted brown and orange wires. Any help would be appreciated. Loyd Bonecutter
    Cap off one of the nozzles and that should reduce output. Its the same pump as what you had. So you must of being having trouble already.
    I did get the pump hooked up and everything works. Does you pump put out more volume or pressure? It about emptied my tank in a few short runs and was also rich. Should I change to smaller jets on my dual spray? If so, what size? Do you have any? Thanks
    I got an external replacement pump for my SMC kit. The two white wires on the SMC go into the tank to what looks like a low level warning. Do I splice your two white wires into those running from the tank or are they for something different?
    R
    Razor
    They are for its pressure switch. Low level is on your tank. If your old pump used a pressure switch, you can use the white wires. If it didnt.. then dont worry about it.
  • Loading…
  • Loading…
  • Loading…
Top