Search results

  1. DR BOOST

    Xfi question

    my guess would be wrong valve springs or wrong length pussroods
  2. DR BOOST

    Xfi question

    did you change the valve springs before you started pimpin?
  3. DR BOOST

    Excellent line bore

    do you usually degree the cams?
  4. DR BOOST

    header crack welding

    before you go to weld it, post a picture of the crack. Some headers are beyond repair.
  5. DR BOOST

    header crack welding

    contact Turboburick on this board. He has done at least a dozen of them for me. he is in Mokena
  6. DR BOOST

    serpentine belts not lasting long

    Also check the crank bolt. It is the big 1 1/8" in the center of the crank pulley. a walking balancer will do this.
  7. DR BOOST

    serpentine belts not lasting long

    fwiw I use a Gates K060635HD V-Belt
  8. DR BOOST

    serpentine belts not lasting long

    what alternator do you have?
  9. DR BOOST

    serpentine belts not lasting long

    There is also another situation that makes this problem worse. A non-stock alternator such as the commonly used LT1 alternator uses a smaller pulley which requires a shorter belt.
  10. DR BOOST

    Safety wire, did I do it right?

    I don't think that is correct. The way shown won't prevent the bolt from loosening, it may just prevent it from falling out.
  11. DR BOOST

    Boosted RPS and Gee M Racing

    i noticed that you have gn1 heads. the bolt holes are not drilled perfectly perpendicular to the flange and studs exaggerate this angle. the studs must be installed like a bolt.
  12. DR BOOST

    Boosted RPS and Gee M Racing

    I test fitted the headers on some old heads sitting on my workbench. i ended up enlarging 4 holes and determined that they would not slide onto header studs because the header bot standoffs were not welded perpendicular to the flange. also note that stock header bolts need to be shortened...
  13. DR BOOST

    Window Turbo

    Is there a difference between the g-bodyparts one and the richard clark one?
  14. DR BOOST

    Patching or plugging a Drag Radial

    i use the Stop and Go tire plugger. i had one in my last set of drag radials for 60% of its life. stopngo.com
  15. DR BOOST

    Anyone ever shipped a puppy ?

    I should have been more specific. Previous abuse can manifest when you least expect it. I would hate for it to happen when a child is around. If i am going to feel comfortable with a potentially dangerous animal in my house, I would prefer to have it socialized, trained and not abused from a...
  16. DR BOOST

    Cam Sensor question

    This is assuming that someone else previously did the hard work for you. You can mark the wheel to the body of the sensor and pray that the marks don't get removed.
  17. DR BOOST

    Anyone ever shipped a puppy ?

    I have always wanted to do this but i like large breeds and Ive found it safer to buy a pedigree dog from a good breeder. The dogs tend to be more predictable.
  18. DR BOOST

    Engine cranks but doesn’t start with water damage. Replacing connectors and re-pinning the ecu side of the factory engine harness

    can dielectric grease be used on this connector to prevent future issues?
  19. DR BOOST

    Cleaning out the shop, parts for sale cheap!

    ill take the pulley set. pm me PayPal info
  20. DR BOOST

    Anyone ever shipped a puppy ?

    I have experience flying 18 hr trans continental flights with a boxer puppy, american bulldog puppy, and a 200 lb american bulldog on different occasions. Do not bring the puppy in the cabin with you. Boxer puppies are chicken $hit and will go nuts when the plane takes off. Put them in a...
Top Bottom