Search results

  1. TurboT231

    Stage Right Transbrake?

    You'll be fine building boost with the T-brake. It's just hard on parts. For me it's just to easy to do it the way I've been.
  2. TurboT231

    Stage Right Transbrake?

    Foot brake till it starts to creep then NOS button at the same time as WOT. I have Vac. brakes so it's maybe 2-3 lbs of boost.
  3. TurboT231

    Stage Right Transbrake?

    The brake works great but I've gotten a way better short time using nitrous to spool off the line without beating the drive train up.
  4. TurboT231

    Stage Right Transbrake?

    Can one of the transmission experts tell me if the separator plate can be used after drilling the 2 holes for the stage right brake? Just want to remove the brake from the valve body but not sure if the plate can be used without the trans brake parts?
  5. TurboT231

    Precision GTQ exhaust wheel.

    Looking for a customer to see if someone has an old school GTQ exhaust wheel from a Precision DBB 70 turbo.
  6. TurboT231

    Turbo Regal Picture Thread

    Look's great Steve, look's a lot like yours.;) Tell Jerry to just turn that boost up a few pounds, it will run that 10 with no problem.(y)
  7. TurboT231

    Champion Iron heads.

    Florida. Rockers were sold already.
  8. TurboT231

    Champion Iron heads.

    Selling these for a friend. Champion CNC ported iron heads. They have new seals and come with 26918 beehives on them but can change to Comp 980's if you don't have a roller set up. $900 shipped. Can E-mail pictures if needed.
  9. TurboT231

    Next Broward Turbo Buick Meet 1/11/2015

    I'm about 90% correct predicting rain when I make plans to take my sled out. Incredible.
  10. TurboT231

    Next Broward Turbo Buick Meet 1/11/2015

    Hey Adam, count me in. Let's just hope it doesn't rain that day.
  11. TurboT231

    GN Rear Seat Upper Section Cover.

    Checking to see if anyone has an original rear upper section cover only in nice shape. Trying to keep a customers matching the lower section.
  12. TurboT231

    Any Custom Interior Pics?

    A few of mine with the Leir seats.
  13. TurboT231

    Lee Frederick.

    Very sad day yesterday. I will truly miss talking to my friend Lee.
  14. TurboT231

    Siamese question

    Pop out one of the side freeze plugs and you'll be able to see if the bores are siamesed together. Pretty sure all 4.1's are siamesed.
  15. TurboT231

    SALE-DETENT(TV) CABLE $17.95 or $12.95

    Cable. I'm in for one. Thank's.
  16. TurboT231

    need a short block in florida .

    Short block. Sent you a PM.
  17. TurboT231

    Best fuel pump to run 120 lb unjectors

    Same hobb switch used with the old ATR double pump set-up to activate the second pump.
  18. TurboT231

    Best fuel pump to run 120 lb unjectors

    The small yellow jumper wire connected to ground is what turns on my high speed. It's activated by a hobb switch after 15 PSI.
  19. TurboT231

    My Fuel System Parts List

    I used the gas tank from my N/A 84 Regal which has a baffle like wall just past the two -12 fuel bungs that you see there. I would have put them further back but that baffle would not allow me to get the nut on the bungs to tighten them up. I got the idea from Chuck Leeper after he told me he...
  20. TurboT231

    My Fuel System Parts List

    Weldon. That pump looks like it will get the job done for sure. I went with the Fuelab with it's high & low speeds it's been working good so far.
Top Bottom