32 PSI no knock through the 1/8th

[bilt2run]

Not complaining, but almost frightening...

Razors kit set at 5.5 with denatured alky
45a
60 lbs injectors
Hot wired 340 (Double Pumper going in this weekend)
zo6 maf
Translator gen II.. only subtracted some fuel at cruise and idle 125-128 blm's
Atr 3" DP
30-32 psi controling boost with my foot so far.. 850's and .07 highest KR

trying to get control of the 45a and its outstanding boost capabilities is next

Yes, knock sensor is working and the gauges are all new autometer

Any Thoughts?

 

[NHRA Super Gas]

What did it run?

 

[Lee Thompson]

tiu

Come on--- Turn It Up!!!!!

 

[bilt2run]

Safe to turn up the wick?????

no official time we were just tuning on our quasi legal strip. only wanted to see what boost I could hold through the 1/8th so far.
I still have to hang my Double pump and mount up my new v1. I am shooting for 10.999999999 in the 1/4 on pump gas/alchy. I ran 7.0 in the 1/8th with a similar set up. Of course the billet trans, 10" MT's and t brake help a lot

 

[bison]

no official time we were just tuning on our quasi legal strip. only wanted to see what boost I could hold through the 1/8th so far.
I still have to hang my Double pump and mount up my new v1. I am shooting for 10.999999999 in the 1/4 on pump gas/alchy. I ran 7.0 in the 1/8th with a similar set up. Of course the billet trans, 10" MT's and t brake help a lot

My guess is 10.50@129mph with a 1.50 60'. Gotta love that alky

 

[Turbo1dr]

I can run 40psi with the timing at 25* ATDC at WOT with alky.