55 lbs injectors

[andy999]

what do I need to change to run 55 pound injectors

 

[Fuelie600]

If they are low impedence injectors, you'll have to have your ECM modified to run them. Bob Bailey will do this for you. HTH, Brian

 

[TTA 449]

Was your engine that lasted 4 passes built by Mercel in New Jersey? Just curious.

Ken

 

[gn-geoff]

Andy999 if you need a set of 55lb injectors,I have a set to sell if needed.

Geoff
ccornwall@uniserve.com

 

[andy999]

If they are low impedence injectors, you'll have to have your ECM modified to run them. Bob Bailey will do this for you. HTH, Brian

Does anyone have Bob Baileys number thanks for the help.

 

[andy999]

Andy999 if you need a set of 55lb injectors,I have a set to sell if needed.

Geoff
ccornwall@uniserve.com

Thanks I already have a set I just need to know where i can send my ecm to be modified.

 

[Fuelie600]

Andy999, can't find his e-mail in my address book. Try calling Mike Licht @ "Full Throttle"---he will have it. Brian

 

[Fuelie600]

Was your engine that lasted 4 passes built by Mercel in New Jersey? Just curious.

Ken

You are getting real warm Ken! PM me. Brian

 

[andy999]

Andy999, can't find his e-mail in my address book. Try calling Mike Licht @ "Full Throttle"---he will have it. Brian

Thanks but how do i get in contact with him.

 

[Eric Stage I]

You need to check the part# on them. There are 2 different Siemens 55lb, a high-z and low-z.
Part# 3102 needs a modded ECM.
Part# 3172 does not need a modded ECM.

 

[andy999]

You need to check the part# on them. There are 2 different Siemens 55lb, a high-z and low-z.
Part# 3102 needs a modded ECM.
Part# 3172 does not need a modded ECM.

Ok thanks ill have to check the number on them first.

 

[Fuelie600]

If they are low impedence injectors, you'll have to have your ECM modified to run them. Bob Bailey will do this for you. HTH, Brian

I think his e-mail is bob@baileyengineering.com ,but if that doesn't work, Full Throttle is a board sponsor. Just click on Mikes link on the home page.