87 gn partout

[fnsikser]

just picked up an 87 hard top gn for a few parts i needed for my 86 T.the car is nearly complete but the body is pretty bad..int is decent..
if you need something just lmk.

 

[turboandy]

Wheels

Does it have the stock rims? If so what shape are they in and do you have pics? Thanks.

 

[fnsikser]

Does it have the stock rims? If so what shape are they in and do you have pics? Thanks.

they are in ok shape,here is one of them that i spent about 10 minutes on..with a little more time they would look pretty good.the centers could use a sanding a repaint..

 

[cjmatt]

what condition are the upper door panels in? any warpage?

 

[UR50SLO]

Stock Shifter Cable......?

Ours Broke... Let me know if it's avalible.
Please don't PM me... Use e-mail UR50SLO@aol.com
Thanks,Scott

 

[racer5252]

do you have a power steering reservoir? how much shipped to 43517? thanks,chris

 

[fnsikser]

what condition are the upper door panels in? any warpage?

they are in pretty good shape..i'll snap a few pics monday..

Stock Shifter Cable......?

Ours Broke... Let me know if it's avalible.
Please don't PM me... Use e-mail UR50SLO@aol.com
Thanks,Scott

it shifts fine but i'll check the actual condition monday...

 

[turboandy]

wheels

PM sent.

 

[Randy Greenoe]

The black plastic covers that go around the front seats?

 

[4timesT]

Posi rear and how much?

Thanks

 

[precizion818]

PM Sent

 

[ALVAROG1983]

Do Have The Trottle Cable Bracket Oil,trans Dip Stick Thanks

 

[usetaboost]

need a good turbo if you got one. Any performance goodies on this car you are parting?

 

[turbo6man]

ESC module

Do you have the ESC module, how much shipped to zip 95650

 

[mario987]

You hae a pm

 

[85 conversion]

pm'd you about radiator support!

 

[G-Force]

I Need a radiator hold down bracket.

 

[Malibudriven81]

How are the bumper fillers?

-Nick

 

[85Dan85TType]

You wouldn't happen to have a need for the wiring harness, would you? Let me know the kind of condition it's in if you don't need it! :smile:

 

[turbojack]

parts for GN

I`m needing the heat sheild over the a/c-heater box ,under the hood,,also need the metal vaccum lines--let me know what ya got and a price--thanks,,Jack