turbov6joe
Signal 1 J-12
- Joined
- May 22, 2002
- Messages
- 2,220
Ok, my pop's GN has developed a case of the ass over the winter. He parked it running like a top, now it won't start. It cranks fast, slows down, then speeds back up but will not fire. It has fuel, spark, and a charged battery. We replaced the crank sensor with anew unit, put a known good coil pack and module on it, replaced the plugs, new cam sensor cap, and verified that the cam sensor is spinning. We also verified grounds and electrical connections. The only things we have not messed with yet are the ECM/chip. We will also R&R the cam sensor tomorrow, but are looking for additional ideas before we get started. The one thing that bothers me, is that he found that the hot wire off the battery heading to the starter had the insulation rubbed off and had been grounding on the frame. Any chance this cooked the ECM?