Anybody using 60 lb / hr Montron injectors

[EGOKILR]

If so, they say they are High Z injectors and you dont have to modify your ECM. I am just getting ready to install my New Razor Alky and chip By Eric the man, Just wondering what kind of times I can expect out of my combo at bottom. Just found out I have a 2800 stall will that be enough or do I have to go with a higher stall.

 

[TURBOV6]

If so, they say they are High Z injectors and you dont have to modify your ECM. I am just getting ready to install my New Razor Alky and chip By Eric the man, Just wondering what kind of times I can expect out of my combo at bottom. Just found out I have a 2800 stall will that be enough or do I have to go with a higher stall.

Check out my sig. No need to mod the ecm.

 

[Royal-T-Ltd]

You will LOVE these injectors - they are awesome - like said, no need to mod. I haven't been to track yet - but the drivability and butt dyno tell me they are the sh!t. also as a bonus it was easier to pass emmisions with my 60/65 lb injectors then with my 42.5lbers.

 

[Gary Wells]

Mototron, & so far best price is $330 shipped to my door. If you can do better on the price, drop me an E-mail please.

 

[EGOKILR]

Nope, thats what they are 55 from SETurbo and 60 from Gbodyparts

Ok cool guys thanks for the info, I will be getting them and installing my alky. Gary I have done searches and only Gbody's name pops up. But SE Turbo out of Georgia also has them. Do you have them in your car also? Seem to be good as far as I can see.

 

[vader87]

I have them and love them! Was worried that they would be too small. No problems!

 

[TurboTnZ06]

Jay Carter hooked me up with some of those injectors and a couple chips. Went 10.9 @ 126.9 on my first run here in FL. Perfectly driveable all day long in traffic.

 

[EGOKILR]

So far Nothing but good reviews, I will be getting them soon

Just waiting to see who is going to give me the best deal to my door. TurboTnZo6 What kind of turbo are you running and whats you boost @ launch.

 

[TurboTnZ06]

TurboTnZo6 What kind of turbo are you running and whats you boost @ launch.

TE45a, 1-4 psi on that launch. I honestly don't know what psi it was but it wasn't much since it was my first shakedown pass. Next pass I tried launching harder and broke an axle on the foot brake without moving off the line Now I'm running Moser's but haven't been back to the track since I lack proper safety equip.

The Buick/

 

[EGOKILR]

TurboTnZo6

Thanks for the info. My quest is 10's, I will see how I do with the new additions.

 

[TURBOELKY]

tens,ahhh

I like my moto's, the elky sports some now. My quest is for the mid 13's but I need a tranny and a converter to get me there, and some good gas or alky.....

 

[my 1st gn]

60 lb injectors

I love them 2

 

[d0n_3d]

They work very well...I have a customer that has run the fuel pressure on a front wheel drive GTP at 100 psi on these things

 

[TurboTnZ06]

They work very well...I have a customer that has run the fuel pressure on a front wheel drive GTP at 100 psi on these things

I think I set my FP reg at static 50 psi and then pumped in 25+ psi boost, so I guess I went ~75 psi on them. I was scared of knock and didn't know what kind of boost I'd get (just moved from Colorado to funny Florida) so I tried to play it safe and have lots of fuel during my axle weakening first run...