billet overdrive carriers/servos/ring gears

[chris718]

our redesigned billet reinforced overdrive planetary carrier is now on sale for 225.00 shipped.billet intermediate servo 115.00 shipped.billet overdrive ring gears 149.00 shipped

 

[jakeshoe]

The servos are nice Chris. I just installed one tonight.
I finished the trans with all the billet internals tonight and installed it. I'll test drive it tomorrow (later today).

 

[chris718]

jake how is the 1/2 with the servo or is it raining there too?

 

[jakeshoe]

The trans I installed your servo in isn't in operation yet.

It should be tested late this week. It's going in this car.

.

I used your recalibration kit and installed another trans in the Camaro using a Superior Servo, dual feed, etc so I could road test the trans before I ship it.

The engine in the Camaro is a 12-1 compression 383 SBC, Brodix heads, healthy solid cam, etc. It as detonation issues so I'm lowering the compression and putting a tamer cam in it for the customer along with the 200-4R I finished for it yesterday.

I'll let you know how the servo works.

 

[jakeshoe]

Here's why Chris's forward drum is necessary...

 

[chris718]

okay i see.nice car.be sure and save all of the broken drums.i can use them .im getting ready to run some more drums.last run was over 75 and theyre all gone its great to see the design has proven itself over the last 4years.i should have the billet low reverse and direct clutch pistons ready next week.they look great and work even better.

 

[jakeshoe]

Zac took the broken drum for a souvenir.
I have a handful of the stock drums. I also have that D5 converter. I'll ship all that stuff to you sometime when I'm feeling rich

Did anyone call you on a TH400 variable pitch converter? I sold a pump/drum setup and told the guy to call you for a converter.

 

[jakeshoe]

I'll take some of the direct drum pistons. Is it a complete piston or a ring?

Sonnax makes a ring I think. Either way I need a couple.

 

[chris718]

no calls yet,it is a complete piston .awesome piece.im working on a direct drum that will carry the trans to the next level.

 

[chris718]

jake btw i just got the rentech mercedes upgrade for the v12 turbos600.635 hp im waiting patiently for the rain to stop so i can turn off the traction control

 

[jakeshoe]

Be careful Chris,
you won't be doing us any good in jail or the hospital. :biggrin:

I bet that is a fun ride.
I need to get caught up and put my Chevelle back together.

 

[chris718]

youre right.ill drive it responsibly.no kidding.

 

[mikestertwo]

Here's why Chris's forward drum is necessary...

I have a couple forward drums that look like the one on the left. All my trany's now have the one on the right.

 

[bison]

I have a couple forward drums that look like the one on the left. All my trany's now have the one on the right.

That one barely even twisted before it broke. I had a nice barber pole looking one about 8 years ago. This part is almost mandatory on anything sub 12's these days.

 

[bison]

youre right.ill drive it responsibly.no kidding.

Get us some quarter times at the strip with that beast. Throw in some MT DR's and see what you get.

 

[bison]

Chris ill be needing a couple of those pistons when done. I have a few forward drums and some boost valves i need to send you. Ill call tomorrow.