Looking for a hydraulic roller cam recommendation for my Stage 1, 274". I drive it on the street and take it to the track on occasion. GTQ 76 turbo, M&A heads, current cam is a 218/212 flat tappet (Comp Cams). 9.1 compression, Oliver rods, JE pistons, Buick Motorsport crank, 3:42 gears, 9" Art Carr converter (3400 stall), 2004R, PTE front mount. Going to a roller because of the problems with cam lobes/lifters due to the reduction of ZDDP in the oil but at the same time increase its performance. Appreciate any information/experience, thanks.
Cam Recommendation for 274 Stage 1
- Thread starter Garycar
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
gs462
Active Member
- Joined
- May 18, 2003
- Messages
- 1,275
224/224 would be my suggestion.
ttypewhite
Well-Known Member
- Joined
- Oct 1, 2001
- Messages
- 4,156
i have a 237/237 solid roller forsale. I ran this sort of setup before witha different cam in a 109 block and drove it everywhere. I used a solid roller cam with hydralic roller lifters and springs. If later on down the road you want to upgrade. Sell the hydr lifters and springs and get solid roller lifters and springs.
