Car won't idle after long storage. Using M.E. 16 POS.

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

KEVINS

Post count: 24,375
Joined
May 24, 2001
Messages
2,991
The car has been in storage for a a year and now it won't idle (drops to 450) but drives fine otherwise. I put good gas in it and drove it around town for a while and it drives fine except it tries to die when idling even in neutral.

I am using a MaxEffort 16 pos and I have Direct Scan. I can't hear any obvious vacuum leaks and there is no stumbles when driving around town.

It's been a LOONG time and I forgot a lot about how to tune this thing with the ME and DS. What should I be looking for?

I thought I would look at the BLM's but DS says the update is turned off or something like that but they do read 128 and so does INT.

FYI: IAC reads 175.

Car ran great before storage.

Thnx
KS :cool:
 
Get your IAC's down around 15 hot park idle, which should give you 35ish hot in gear. It's been a bit since I sold my ME-R, but this should get it done for you. Keep idle TPS under .46 .You might also have a stuck/dirty IAC valve. If all else fails, contact Steve. HTH, Brian
 
idle

Hi,
It sounds like your IAC has a bug up it's ass. Pull it out[1.25" wrench or socket]clean it up and go from there.I ran into this problem with my car last year,after a while in storage. The above cleaning did the trick. Good luck!
 
Back
Top