Delphi 10056 MAF

[vader87]

Just wanted to post up info about the Delphi 10056 MAF Sensor. I wanted a cleaner look and still use a MAF Translator. Yes I know XFI will get rid of the maf but I didn't have the $2k for the upgrade. I purchased a 4 inch pipe sensor mount off ebay and had it welded into my pipe. Mounted the sensor and connected the Translator. NO ISSUES! I also used the air straightener as it is just after a 90 degree bend. So if anyone wants to ditch there LT1, LS1 or Z06 MAFs, this is a good option.

IMG_20150512_182058 by Robert Griffin, on Flickr
IMG_20150512_182100 by Robert Griffin, on Flickr
IMG_20150512_182106 by Robert Griffin, on Flickr
IMG_20150506_195904 by Robert Griffin, on Flickr
IMG_20150506_195857 by Robert Griffin, on Flickr

 

[626gn]

Very cool!

 

[TurboBuRick]

What base setting did you use in the translator?

 

[vader87]

Same as the LS1. Talked to Mr. Bailey and this is a replacement for the older LS1 sensor.

 

[Pronto]

Looks like the new plastic LS1 MAF all stripped down. Nice install.

 

[vader87]

Looks like the new plastic LS1 MAF all stripped down. Nice install.

Yep that is correct!

 

[TurboBob]

nice work

 

[vader87]

nice work

Thank you Sir, and thank you for the help and Info!!!

 

[precizion818]

What about the onboard IAT sensor......... Is it calibrated for our cars? Can it be used in place of our IAT

 

[vader87]

What about the onboard IAT sensor......... Is it calibrated for our cars? Can it be used in place of our IAT

Nope