Dual solenoid for Bstc Question

[87GNcospg]

i did a search previously for some dual solenoid information for my BstC and i came across this picture. Dual Solenoids
now i can't find the owner of this picture. i was wondering if the two peices in the line going to the soleniods are specific to this application? i am referring to the white connector right above the passenger side valve cover breather and the copper looking thing a little bit down from the white connector. does the white connector need to be a specific diameter?

 

[BlackMagic]

The white thing (actually a vacuum line "T" fitting) is not specific.

Get the largest one that will fit inside your vacuum hose, and make sure all 3 sides of the "T" are the same size. Sometimes the one side of the "T" will be a smaller size than the other ones, and you do NOT want that.

 

[87GNcospg]

thanx. i knew it wasnt called a white thing but i was having a brain fart at the time.

 

[larry33kc]

I have seen this done before but can't remember the reason why.

What does running two solenoids do, and how do you hook it up

 

[87GNcospg]

if you have the BstC from ramchargers, you only have a range of about 6-8 lbs of boost control. thats just the limits of the solenoid on our cars. if you purchase a second solenoid (from kirbans or caspers) you can run them together to get about a 12 psi range. you also have to purchase the Y-connector from ramchargers.