Fender roller

[USMC_Turbo6]

Any of you guys in the oceanside or San Diego area have a Fender roller I could borrow or rent?

 

[Instro84]

hey Dee try craigslist, some of the imports guys usually have them for rent in the LA area the maybe someone in you vicinity has one.

 

[USMC_Turbo6]

A friend of mine from Florida is going to mail me his

 

[turbolou]

If your going for the maximum amount of tire clearance I recommend using a Sawsall or electric saw to trim the fender edge. Then using a small body grinder to blend in the inside edge. I have done this many times with good results & never seen the need for any body rollers . If you have any questions call me at 949-378-1590 Regards Lou

 

[USMC_Turbo6]

If your going for the maximum amount of tire clearance I recommend using a Sawsall or electric saw to trim the fender edge. Then using a small body grinder to blend in the inside edge. I have done this many times with good results & never seen the need for any body rollers . If you have any questions call me at 949-378-1590 Regards Lou

Okay Sir will give you a call. I'm going to run 295/55/15 on a 10" weld wheel. Thank for your feed back. Dee