Fuel rail adaptor

[KansasCop87GN]

I need to find some one that offers an adapter to install a FP gauge to the rail. My gauge is 1/8"NPT. I would like to mount it so that I can look directly at it when looking over the LF fender into the engine bay. Any suggestions?????

 

[GN ERGY]

Try Kirbans, Postons, Jack Cotton, Check vendors on the www.gnttype.org site.
Tarey D.

 

[KansasCop87GN]

Fuel rail adapter

TTT

 

[killerb]

what size is that fitting?i dont know how they size those schader fittings.

 

[KansasCop87GN]

Fuel rail adapter

One post I read said it is -4 AN. If so I need a 90 degree elbow with the -4 AN to go on the fuel rail and 1/8" NPT female to screw the gauge into. Can anyone else help. I havent found quite what I am after with the vendor catalogs I have. May have to make some calls on Monday

 

[Lee_Burough]

Johnsperformance

Get the "Fuel Rail Tee Valve 0206" from:

http://secure.johnsperformance.com/...Jt8Bt2005412.23529*na6Ri&product=Fuel-Systems

$15

 

[KansasCop87GN]

Fuel rail adapter

Iburou,

Nice looking piece! But I have a gauge that has 1/8" male NPT on it. I cant find anything around here that will go from the port size to 1/8 NPT female to let me screw the gauge into. I am I missing something here? What is -4 AN?

 

[Black Car]

Paul,
What you need is a -4 female AN to 1/8" male npt. Then screw a female to female 90* elbow onto it. Then you can screw your gauge into the elbow.

 

[ChrisCairns]

The fuel fitting on the rail is an SAE flare which is 45 degrees. The -AN flare is a 37 degree. The threads are the same but it may leak.

What you want is an SAE 1/4" female inverted flare.

 

[GN SBS]

Thanks for the information Chris-- I have a fitting with an -AN flare and it does leak ever so slightly.

I'm using an Autometer electric FP gauge with a male fitting (believe it is 1/8" NPT) and I need a fitting to get it on the rail.

Anyone have a good source for the type of fitting that Chris mentions-- 1/8" NPT female to SAE 1/4" female inverted flare ?

Or know of another solution ?

thanks,
Scott

 

[KansasCop87GN]

Adapter

Scott,

After alot of hunting I think I may have found the right adapter. I have one ordered and it should be here this coming week. I will post more when I see and try it. By the way I had a 1/4 "inverted" flare and it did not fit. Will keep you posted.

 

[salvageV6]

Maybe this will help you. Caspers Electronics.

Screws on the schrader valve and provides a -4AN outlet for a fuel line hose.

Go from -4AN line available at Summitts or Jegs to the 1/8" NPT fittings.

Tons of adapters available for that.

http://www.casperselectronics.com/c...cgi?search_request_button=yes&keywords=102071

Other vendors may have them as well.

 

[KansasCop87GN]

Fuel rail adapter

Hmmmmmmmmmm, Now I wonder. I called Caspers in my hunt and the guy I talked to said they didnt have anything but he knew for sure that Summit or Jegs had it. Short conversation to say the least. Mind you I am NOT bashing Caspers, I have purchased several things from them and have always had GREAT service