Full Throttle Speed 3" Single exhaust - who has used them?

[J Banning]

Who all has used the 3" single cat back that Full Throttle Speed sells?
http://fullthrottlespeed.com/Dynami...tId=EVEREST-13145181EFEKG702&ic=0013SIGN&tpc=

From a performance standpoint, what is the best flowing (yet relatively inexpensive) muffler to use? I'm NOT interested in stainless anything.

Thanks,
-Banning.

 

[Reaper]

for my money its the DynoMax race magnums aluminized and welded. i bought a TH 2.75 from modern muscle car a long time ago and when i asked mike for his opinion on what mufflers to go with he said get the Dynomax. he was not wrong i dont regret that spend one bit.


Dathan

 

[Bob Avellar]

I just ordered the exhaust on Monday and should see it by the end of the week. i'll let you know how it is. I ordered the walker ultraflow aluminized for mine. Seemed to be about the same as the magnaflow (not the bullet) in construction but it has a lifetime warranty. The Magnaflow and the Hooker Max flow only have 90 days or 1 yr warranties I'm pretty sure.

 

[Bob Avellar]

Here's a link to the Walker dynomak ultraflows:
http://www.dynomax.com/mufflers.stm

 

[Reaper]

race magums = ultraflo, but the race magnums are cheaper

 

[J Banning]

You have to run a offset inlet, center outlet muffler... correct?

What does the tail pipe look like? Clean looking? Obtrusive? Straight cut? Slash cut?

Thanks,
-Banning.

 

[Bob Avellar]

Well the muffler came in today. Looks good and its a full 3" inside, straight through. Just waiting on the exhaust now. Aren't the Magnums more of a bullit style rather than an oval? I think this exhaust requires an offset in/center out configuratin like the one I got.Maybe I am mistaken but I thought the magnums don't have any offset.

 

[badboy86gn2]

best bang for the buck if you dont need stainless ive had mine ummm 5years awsome

Johnny

 

[JCotton]

Banning, we have an awsome singleshot 3", slash cut tip, with or without the race magnum straight through muff. Give me a call and I'll quote you a good price. It's being used on a few TSM cars with excellent performance results....

 

[Mike Licht]

We beat ALL deals
Mike

 

[Bob Avellar]

Mike's 3" exhaust arrived today. It has a slant cut at the exit, smooth bends. Outside diameter of the pipe is 3" and there is a heavy tab jwelded just aft of the axle bend. There is also a heavy piece of angled steel as a separate piece-some kind of bracket. Don't know how the 2 brackets are actually used to mount it. Maybe when its under the car it will be obvious. If you see this, Mike-maybe you can give a little explaination of how they are used? I took several pictures of the pipes and muffler on my kitchen floor (remodeling the house,too. I have no idea how to post the pictures here. Maybe someone can explain that to me,too. Or I can email them to anyone interested if you give me your address.

 

[cwmccray]

Hey Bob
Email me the pix of your exhaust. I am in the process of getting the same exhaust. I think I am going to get the Magnaflow muffler. A friend of mine has them on a GN and they sound awesome. (No DDRONE ). If I don't have the money, I will end up with the Dynomax Welded Ultra (Wife has Income Tax check )

cwmccray@bellsouth.net

Thanks
Chuck

 

[irockwithdirt]

Dunno if this will work, but here it goes http://www.t6p.com/gallery/showgallery.php?cat=500&ppuser=720

 

[Bob Avellar]

Check out my web site. I have some pics of the exhaust installed on my latest restoration pic pages.
http://home.comcast.net/~bavellar/

 

[Bob Avellar]

either site will work.

 

[AsphaltAnihil8r]

Originally posted by Bob Avellar
either site will work.

Hey Bob,,was checking out your site and I stumbled upon your Woodworking skills,,I have some Balisturs that the dog thought were chew toys,,could you possible duplicate them for a price,,I also have a wood grain lighted dash if you are interested...
Thanks Dennis

 

[channer]

How long or short of a muffler do you need for Mike's pipes?

ps: do you know how much the shipping weight for the pipes were?

thanks... dave

 

[JZ 97 SS 1500]

Looks like a nice unit indeed. As far as performance I liked the ATR single shot muffler and cat-back. Sounded extremely mean and under WOT it would scream. I also have the edelbrock series muffler using the ATR piping. Its quieter and has a more deep and mellow sound and yet performs great also.

Jose

 

[Bob Avellar]

Dennis, I could probably duplicate them but I just do not have enough time. I have to get the kids outside to make major repairs to the athletic field house if the weather ever breaks plus we are building 3 different sheds for people along with the regular stuff we need to accomplish.I'm working on the car, drawing plans for a garage, then I have to build it so I can have a place to put the Buick at the end of the school year. Plus my wife has me doing all sorts of remodeling inside the house+ I tore my deck down and have to replace that+ I only got 2 sides of the house painted last summer++++++ Get the idea? I need 10 of me just to keep up! Do you have any vocational schools in your area? If so you might try that route to replace your dog's chew toys. I hate to refuse but I am afraid I'd never be able to get to it.