Help!!!

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

quick85nat

6 shooter
Joined
Jul 11, 2003
Messages
97
my car last monday on the way to work, i thought that it would be the crank sensor cause i replaced it like 3 weeks ago with a wells so i put in the new gm sensor and still nohing,ihave checked all the fuses what else could it be? i noticed that the tach isnt reading anything when its turning over could it be the computer? is there any other way i can tell besides putting a known good one in?
 
check your module

are you getting spark? check your coil pac and mudule mine did the same thing i replaced the module and computer and still wouldn't start ended up being the computer not sending a signal to the fuel pump relay for priming for start-up...
there are so many things to check but i would start with the module and coil pack... when you replaced the crank sensor did you set the gap? and tighten down the bolt? when they run right they are great but when they don't WHEW it sucks
 
Check the orange wire connection near the battery. Check the fuses, like ecm, fuel pump, and fuel injectors... checks all grounds.
 
Back
Top