How do I not cut/splice wires for Trans + Installation

[87LtdT]

Just got my T+ at the Nat's (PT&E). Will go with LS1 MAF. Would prefer to not cut and splice any wires. Also want to mount T+ behind glove box like others have done (great idea by the way)

What wires (extensions) are required, and is there a plug and play alternative??

Thanks, Bob

 

[salvageV6]

Ramchargers has the extension cables.

I think they still have the T+ timing extension $$$ cable too. Call and ask for Kevin.

To do the timing mod. without cutting requires an expensive cable that has plugs and sockets for the module connection I believe.

I would just run the T+ timing wire to the ECM and cut the one wire there about a foot from the glove box to save a lot of money and time.

Rest of the cabling might be best done with the extension cables.

You need a large hole in the firewall to get the ends through.

I guess they could be cut in half and then respliced if you don't have or want that large hole.

Connectors are what's on the MAF now so you can see what has to get through the firewall. 2 cables for that setup to the MAF.