Just installed Airbags. What PSI ?

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

V8killR4U

Active Member
Joined
Jan 21, 2003
Messages
1,321
I just installed my airbags this weekend and was wondering whta base setting you guys normally start of with. Right now they are both set at 30 lbs LH and RH. If Im getting some whhel hop on the rear driver side should increase psi or decrease? Not really sure where psi should be?
 
I use 1 bag on pass side
7lbs - street on street tires
15lbs- dragstrip on drag radials:D
 
you have to play with them to determine optimum....but generally run 10 lbs more in pass side.....ie 15 and 5...load the car up and spin the tires....go for "equal black" on both sides

wheel hop is bad bushings, weak control arms.....air bags won't fix that
 
Originally posted by azgn

wheel hop is bad bushings, weak control arms.....air bags won't fix that
Yes, I just installed boxed lower control arms with new bushings, and now two black stripes and no wheel hop!
:cool:
 
Back
Top