MSD Two-Step Question

[VictoryTrans]

What exactly would be the procedure to wire the Two-step to the transbrake, ie. what wire, etc.

Thanks

 

[Chyke]

This is off the top of my head so bear with me. You activate the two step by grounding it. You should be activating the transbrake by feeding it hot out of a relay. Most people I know run a double relay set-up. Ground the transbrake and wire up a relay for it in standard fashion. Next wire up a 2nd relay that is activated by hot but puts out ground. Run the hot activation from the out hot on the 1st relay to the hot on of the 2nd relay.

If you pm me and let me know what type of relays etc you are running, I'll give you all the info you need.