oil getting up to vacuum block

[87GNcospg]

should oil be getting up to my vacuum block? i guess the pcv line is where it is coming from(obviously). i was putting on the RJC power plate today and i removed the vacuum block to make it easier and i got a nice little puddle of oil when i lifted it up. im not sure if this is normal.

 

[87GNcospg]

sorry. i didnt even think of searching for this topic first. found some stuff to read up on now. please post replies here also.
i do have some pics of the install of my power plate. in the pictures of my manifold before and after i put the power plate on you can see a little bit of oil where the vacuum block would normally sit not much though since i wiped most of it up before i took any pictures. when i first pulled it off it created a little bit of a puddle, like i said before.

is this what a normal 160,000 mile manifold and plenum would look like or do i have excessive oil coming up through my PCV valve?

http://community.webshots.com/user/87gncospg

 

[87GNcospg]

if clicking on the link doesnt work then copy and paste it in your address line. not sure why just clicking on it isnt working

 

[bwallace]

Kirban makes a turbo bypass kit. When I replaced my turbo bell I removed the hose from the passenger side valve cover and replaced with a small breather...no more oil in the throttle body. Kirban also sells an in line check valve for the PCV haven't tried it but it's only about 20.00

 

[87GNcospg]

thanks for the help. i already have a breather on the passenger side valve cover though