Please help me identify this turbo

[turbo6mike]

Its a turbonetis with 4in inlet and has a sticker with the number 15035.I have not taken the downpipe off yet to see what exhaust side measures,im guessing 63.Thanks,Mike

 

[USMC_Turbo6]

Looks like the t70 dbb I have.

 

[bison]

Looks like a turbonetics t66 compressor. They don't have the sharp inducer blades and no curvature like the garrett t series. I have a t netics t70 that has a Garrett t70 compressor. Ive not seen a turbinetics 66 with the Garrett t66 wheel ever but I'd guess there are a few out there. So it's likely got a 65f1 or 76p ex wheel if a turbonetics ex housing. If a precision ( name usually ground off) then it's probably an hpq/gtq. So my guess is 6665.

 

[SHADOWII]

It looks like one of the cheetah series of turbonetics for gn's.

 

[bison]

It looks like one of the cheetah series of turbonetics for gn's.

Not with a 4" inlet 2.5" outlet

 

[WhiteTtype989]

Call t-netics , give them the 15035# and they can indentify it

 

[bison]

Call t-netics , give them the 15035# and they can indentify it

Thats the back plate part #. His pictures the better S cover compressor cover with the 5.75" diffuser. The smaller one has a 5" diffuser

 

[bison]

Heres the 5" diffuser. It's a .70 a/r



Both have 4" in 2.5" out. The larger diffuser has 8 bolts and the smaller 6. Here's the 5.75". It's a .55 a/r




The larger diffuser is much better with the t66 even though ideally it wants a larger diffuser. Like the holiest/precision 4"in 3" out or the old Garrett with a .55 a/r and 3" in 2.5" out. The insert inline for pics doesn't work on this app.

 

[turbo6mike]

I just took the downpipe off and found that the exhaust side is turbonetics#20240 with a 2.5 out and it does have 8 bolts around.I want to sell this turbo but not sure what to call it.Thanks for everyones help.

 

[bison]

pics?

 

[turbo6mike]

No I didnt take any pics but I could tomorrow.

 

[turbo6mike]

Heres more pics of the turbo.

 

[bison]

The turbine looks like a copy of a t350 Garrett. Removing the compressor cover and measuring the inducer/exducer of the compressor wheel would help with exact identification.

 

[turbo6mike]

The turbine looks like a copy of a t350 Garrett. Removing the compressor cover and measuring the inducer/exducer of the compressor wheel would help with exact identification.

I will try to get the turbo pulled off soon most likely this weekend and I will get you some measurements.Thanks for your help!

 

[turbo6mike]

Well I finally got around to removing the intake side of the turbo and its a 61.Thanks for the help!