Plug n Play or Hotwire

[RAMAIR1]

Should I hotwire my Walbro 340 or go with Racetronix Plug and Play wiring kit? I'm leaning towards the Racetronix kit but wanted anyone's input that know...

Thanks

 

[RUQWKNF27]

Hum

"should I howtwire my pump or use the racetraonix kit"... If you use the racetraonix kit you are hotwiring your pump.. I think you mena fab. your on hotwire or go buy the kit with the relays an terminals.. Man go by the racetronix kit there is not one better out there, its just a awesome kit. I put one on a car about 2 months ago its so simple to do , took me about 15 min. to do it, hardest thing is pulling the hotwire through the chasis. An "that was hard" yea right!!! So i say by the kit its such a more professional looking then others i have seen..Just my opinion..

 

[RAMAIR1]

Thanks man, exactly the input I was hoping for.

 

[RAMAIR1]

I got the Racetronix wiring kit and now I'm ready to install it. What's the best (read: easiest) way to route the wires. Through the firewall, under the sill and out the trunk or under the car along the frame rail?

Thanks once again from a total novice!!

 

[Raven]

Piece of cake - take it along the inside of the driver's side frame rail straight up to the back of the Alternator.

 

[RAMAIR1]

Originally posted by Raven
Piece of cake - take it along the inside of the driver's side frame rail straight up to the back of the Alternator.

I'm a moron....forgot they email instructions with the tracking number. Couldn't get any clearer than the instructions they gave. Thanks though Raven, I appreciate the input.