I'm am going to replace my vavlesprings soon. I did some searching, and it looks like I want springs with about 80-85 lb pressure. What springs does Poston's sell? Are they the Comp Cams 980's? I'm also going to get the valve seals too. And i'm gonna get the tool from Kirbans. TIA.
Poston's High Performance Valve Springs
- Thread starter Billdogg
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
artrenee10
Older...wiser...and broker...
- Joined
- Jul 23, 2002
- Messages
- 999
www.johnsperformance.com
www.jaysgn.com
www.ramchargers.com
I think John's also sells the tool that you need as well, but quite a few vendors carry these as well
Good Luck
Steve Chambers
www.jaysgn.com
www.ramchargers.com
I think John's also sells the tool that you need as well, but quite a few vendors carry these as well
Good Luck
Steve Chambers
turbo nasty
Turbo Dojo / MNTR
- Joined
- Jul 19, 2001
- Messages
- 9,478
jegs or summit
Comp cams 979 springs
They are plenty
Noticed a difference in my GN after replacing them with slightly over a hundred K on the clock.
I had a hook up at a speed shop spring test the OEM springs and 2-3 fell out of range and the rest were at min spec.
These were referred to me by Red Armstrong (quad air).
Comp cams 979 springs
They are plenty
Noticed a difference in my GN after replacing them with slightly over a hundred K on the clock.
I had a hook up at a speed shop spring test the OEM springs and 2-3 fell out of range and the rest were at min spec.
These were referred to me by Red Armstrong (quad air).
Similar threads
