Precision turbo good for 750HP

[turboxan]

this is a Precision THB5-76 It has the .85 exhaust housing.


http://www.precisionturbo.net/Wc2a33a0fa1ef3.htm

I am not totally sure but but i think it is a PTE 45a please correct me if I am

wrong??

It to big for my combo, no shaft play or smoke, standard jurnal bearing

$600 obo shipped in the USA

I can be reached on my cell call or text. 610-972-5462

 

[turboxan]

I must be asking to much$$$

How about $550??? shipped in the USA

 

[WarWagon]

I must be asking to much$$$

How about $550??? shipped in the USA

This is looking very nice! interested, but broke at the moment.
Bump

 

[84BuickGNYorkPA]

According to the chart 690hp 3" air inlet 2" outlet. 63mm wheel also known as a TE-63(TE-45) http://www.gnttype.org/techarea/pictureguides/turboguide/turbos.html with the .85 exhaust housing. Good turbo for the track with the .85 housing on the top end.
Can you tell me how old it is/how many miles are on it?
Thanks,

Chuck

 

[micknick1]

Trade???

Are you looking for a smaller turbo? I have one that has very little use. I'm in NJ. Mike

 

[turboxan]

It is about 4 years old and 2-3k miles street and strip use.


I just got a smaller turbo thanks.

 

[coach]

According to the chart 690hp 3" air inlet 2" outlet. 63mm wheel also known as a TE-63(TE-45) Turbo Comparisons with the .85 exhaust housing. Good turbo for the track with the .85 housing on the top end.
Can you tell me how old it is/how many miles are on it?
Thanks,

Chuck

The 45a is a 66mm. The 45 is 63mm. I also have a chart that lists the 45a at 750HP and the 45 at 690. I have a 45a with a .63 Garret on it. I have been on the phone several times with Chopper and with Patrick at PTE about this model. With the .82 or .85 it is a top end monster that pulls like a freight train. Bison told me mid 130's in the 1/4 with a gtq wheel. I cant remember how fast with a p-trim. This a mid to low 10 sec turbo easy.

:biggrin:

 

[84BuickGNYorkPA]

Coach, just to be clear, this turbo is not the TE45A here are the spec from Precision Turbo and Engine (PTE) link from the 1st post.

Part # 300-1550
THB5-76
6376E Boosted
690 HP
A/R .85
Exhaust Wheel = Inducer 2.920" (74mm) Exducer 2.542" (64.5mm)
Journal Bearing
3" Inlet 2" Outlet
Compressor Wheel = Inducer 2.476" (63mm) Exducer 3.310" (84mm)

This turbo is the TE-63 (also known as the TE-45) with the 63 compressor wheel, like I stated in my other post. My MAGNA Brother had his car in the mid 10's with this turbo, it's a great turbo...

Chuck

 

[IrvJr]

What stall is needed for this turbo?

 

[turboxan]

turbo has been sold

Thanks guys
and
thank you Turbo buick