Some PCV bypass kit available from BGC??? or who?

[V6UnderPressure]

I was reading a few days ago on what I think was bop engineerings page but didnt see this item. It was some pcv bypass or something of that nature that kept the pressure out of the crankcase when under high boost conditions? Anyone heard of this?

Scott

 

[zam70]

Sounds like the ATR check valve. - just stick with the AC Delco PCV.
There is no actual "bypass" (Crank case has to be vented)

 

[bruce]

Originally posted by Scott4DMny
I was reading a few days ago on what I think was bop engineerings page but didnt see this item. It was some pcv bypass or something of that nature that kept the pressure out of the crankcase when under high boost conditions? Anyone heard of this?

Some use a check valve in addition to the PCV.
The sealing in the stock PCV is about poor to non existent.
Might call Mike at FullSpeed and see if he has them.

 

[JToups386]

www.ramchargers.com sells the comparable unit that ATR has. I believe they're both $20 from either vendor. It's merely a better version of a PVC, that does not allow the case to pressurize. Most of us "vent" the crankcase by using open element K&N's on each valve cover.

I've run them for years, and swear by them!

link to the item.
http://www.ramchargers.com/cgi-bin/...rfnbr=25791&cgmenbr=541&cat1=25468&cat2=25787