taking guess, what will it do on dyno.

[wiked87gn]

taking the car on thursday to dyno it, what do you guys think it will make with 20*chip,24psi, alky, and 91 pump gas with the below mods. i will post the results lets see who gets the closest.

 

[86brick]

370rwhp......

 

[Raymond Bunch]

I guesstimate.....

375rwhp

 

[wiked87gn]

how about torque?

 

[BuickMike]

I just went on the dyno a couple weeks back and here are my results with the mods listed below, 116 in the tank, and 22psi of boost.

Peak RWHP was 384 and peak torque was 504.
My HP and Torque mostly stayed at a solid 375 RWHP and 485 for the torque.

My guess is that you should pull of around 400RWHP if the car is running good.

BTW, my exhaust cutout was only good for 5RWHP.

 

[Taffy]

Originally posted by wiked87gn
taking the car on thursday to dyno it, what do you guys think it will make with 20*chip,24psi, alky, and 91 pump gas with the below mods. i will post the results lets see who gets the closest.

Since it is your car, 250. Good luck!!! Yer gonna need it!

 

[wiked87gn]

lmao at taffy.

 

[Raymond Bunch]

Let's hear them numbers

TTT

When are we going to hear those numbers? I also guess your torque will be around 480.

Ray

 

[wiked87gn]

i will post numbers tomorrow night, remember this is with 91 octane and alky no race gas in tank. will see what it does.

 

[salvageV6]

380HP 500TQ

 

[turbo buicks]

7 quadrillion hp

 

[wiked87gn]

Results

it made

367 RWHP and 462 TORQUE at 23psi on alky, 91 pump and a 20* street chip 02's where in the high 790's.

 

[AsphaltAnihil8r]

Very cool,,
I am glad this was not one of those ,,what will it make _____ and NEVER see the results....

Thanks

 

[86brick]

Well I was the closest! Do I get a cookie?

 

[JDSfastGN]

pretty nice numbers man, congrats

 

[Gary Wells]

Good numbers, Harold.
Whose dyno did you use, and how many pulls for how much money, please?

 

[KillrV6]

good chit bro.

GET A FRONT MOUNT

 

[salvageV6]

I woulda been dead on if you ran the proper 24psi.

Well HP anyway...

Good job.

 

[Hi-psi]

Hmm,....I would have expected a little more torque.

 

[Gary Wells]

There is a little more current information on this post over on t6p.
www.t6p.com

under a post in the general section by the same approoximate name.


http://www.t6p.com/forums/showthread.php?t=1884