I'm looking at getting a Ta-49 Turbo for my 89 TTA and was wondering if it's a direct bolt-on from a stock turbo? Can I use the stock elbow and waste gate? If it's not a direct bolt on what else would I need? I have 009 injectors and a AFPR on the car now. Thanks, Jason
Turbo Ta-49 Question
- Thread starter Jas89TTA
- Start date
tminer
Not quite normal
- Joined
- May 25, 2001
I beleive that all of the TA- series turbos are stock replacements. I know that my TA-49 was.
You might have to modify the "clocking" slightly, depending on your supplier and how close they set it.
If you are using a stock "elbow" then you need to make sure that the wastegate hole is small enough for the stock puck. A vendor should ask, but buying used you might get surprised.
Tom
You might have to modify the "clocking" slightly, depending on your supplier and how close they set it.
If you are using a stock "elbow" then you need to make sure that the wastegate hole is small enough for the stock puck. A vendor should ask, but buying used you might get surprised.
Tom
