What bearings for Eagle Crank/K1 rods

[FastRegalWE2]

I need to get STD/STD bearings for a K1 rods and Eagle crank set up. Federal for the mains and Clevites for the rods, both in performance grade, going in a 9 sec build. ANyone know the part numbers or where to get them?
TIA
Jeff

 

[49-blues]

Interested in this too. i think you need the harder bearings-CB-1443H for rods-coated bearings ,MS960H for crank or federal mogul 1755M for crank (which i have a set if you need them). for cam Durabond from TA Performance i think is the B-13.

 

[NCTURBOS]

Do yourself a favor and get a set of .001 bearings as well, both rod and mains. Double check everything as you assemble it, as I needed to mix and match the std. & .001 to get my clearances when I did my Eagle/K-1 motor.


K.

 

[FastRegalWE2]

Do yourself a favor and get a set of .001 bearings as well, both rod and mains. Double check everything as you assemble it, as I needed to mix and match the std. & .001 to get my clearances when I did my Eagle/K-1 motor.


K.

Are the ones 49 Blues listed then the ones I need?

 

[FastRegalWE2]

I ordered the Federal 107M mains from NAPA and the Clevite H series for the rods from Summit.
Thanks for the replies

 

[49-blues]

Durabonds are supposed to be the best for the cam bearings.

 

[NC87GN]

Good move on the 107M bearings. I am in the same situation and I chose the 107M's. How did your clearances come out, on the mains, assuming you bought standards..? I noticed very little run-out on the main journals and luckily hit .0017-.002 for clearances... I decided to role the dice and bought coated cam and rod bearings from calico. Rod journals, with bearings, checked out .0016-.0021. I am surprised to here that the eagle cranks vary that much on the rods and mains..?

Mike Banas
87GN

 

[FastRegalWE2]

I just ordered them today so I havent recieved them yet. I am not putting the engine together, it wont last long if I do
When my builder gets them in I can update the post

 

[49-blues]

Why did you choose the FM 1755s over the clevites?