What injectors, want to make some power.

[BoostKillsStres]

Here's the combo I'm planning...open to opinions and comments please, only want to do this once...errrr twice Want a killer stree combo and something that will run well on the strip also:

T66 single ball bearing w/ .63 housing.
Champ irons and intake.
206 roller w/ rockers.
V4IC.
3" THDP.
3200 9.5 AC L/U.

Can I get away with 60 Hi-Z's or will I need 72's or 75 Hi-Z's??

TIA

 

[Mike Licht]

The 60's will take you faster than your single 340 pump (from sig) will. If you upgrade the pump and want to MAX it out I would get 72's. If you just want to upgrage the pump mid 10's should be OK with the 60's. With the pump as is and the 60's high 10's will be about it.
Mike

 

[JZ 97 SS 1500]

I would go with the Mototron 60's or RC Eng. HighZ 65's. Either will take you as far as that turbo can go.

Jose

 

[John Wilde]

If you ever think you will upgrade the turbo you may want to up size the injectors. I have used stock, 40, 50, 72, 83 and 160lbs units. Think about were you want to be with the car in a year or two. The 60s are probably the smallest set of injectors that I would ever buy again. Depending onn you goals, stock block people are using up to 95lbs injectors now. Please keep in mind that is for a mid 9 second TSM Car.