I've been away from the board a while. Work has kept me busy. I always see threads about what it takes to get into the 10's. I know what I did to get there was not the safest way but it works and I have had no breakage (except several transmissions) in the engine department. My combo will run in the 9's in Bowling Green this year under 35psi of boost. Please understand again I'm not leading anyone to build thier engine like I did. Just a thread to help guys see a combo that worked and to hear from our other knowledgable members.
Street car with Cold AC
Stock Parts:
Stock Block bored .20 over
Stock Caps with RJC Engine Girdle
Stock Crank cut .20/.20
Stock Rods reconditioned with ARP
Stock front cover with the usual oiling mods
Stock Champion Ported Intake
Stock Heads Ported and Polished
Stock Flywheel
Stock Balancer
Stock Headers
Aftermarket Parts
.20 over Diamond Pistons
Comp Cams 206/206 Roller Cam off the shelf
T&D Roller Rockers
TH 3" downpipe
Accufab 70mm Throtte Body
Precision 70 Plenum with RJC Powerplate
Precision Front Mount Intercooler
Fuel System:
Single In tank Reds XP Fuel Pump
Stock fuel lines
Cheap Adjustable Fuel Pressure Regulator
Dual Nozzle Alky Control Alcohol Injection
Ignition:
Stock Coil/Module
Turbo:
Precision Billet 6466 CEA Gen 2
Engine Management:
FAST XFI 2.0
Chasis:
Stock Driveshaft
Stock Rearend
Moser Axles
Bilstien Shocks
UMI non adjustable rear Control Arms
Stock front control arms
HR Sway Bar
Mickey Thompson 275 Pros
Guys thats it unless I left out a few little things here or there. Simple setup. Dan (Grumpy) has gone faster with less than this. There's no secret here. It runs 10's at 23psi of boost and will run 9's at 30+. I have had this combo for many years and I have tuned it slowly. If I could guess on a part that has made it live it would be the tune. It's never seen knock. Ever. This is on 100% pump gas and alcohol with FAST keeping everything in check.
Do I recommend this setup? It works but there are weak links. That's a choice I made way back. Do I wish there was a forged rotating assemble? Sure. Who wouldn't. Thank you guys for your time. Hope this thread was informative.
Street car with Cold AC
Stock Parts:
Stock Block bored .20 over
Stock Caps with RJC Engine Girdle
Stock Crank cut .20/.20
Stock Rods reconditioned with ARP
Stock front cover with the usual oiling mods
Stock Champion Ported Intake
Stock Heads Ported and Polished
Stock Flywheel
Stock Balancer
Stock Headers
Aftermarket Parts
.20 over Diamond Pistons
Comp Cams 206/206 Roller Cam off the shelf
T&D Roller Rockers
TH 3" downpipe
Accufab 70mm Throtte Body
Precision 70 Plenum with RJC Powerplate
Precision Front Mount Intercooler
Fuel System:
Single In tank Reds XP Fuel Pump
Stock fuel lines
Cheap Adjustable Fuel Pressure Regulator
Dual Nozzle Alky Control Alcohol Injection
Ignition:
Stock Coil/Module
Turbo:
Precision Billet 6466 CEA Gen 2
Engine Management:
FAST XFI 2.0
Chasis:
Stock Driveshaft
Stock Rearend
Moser Axles
Bilstien Shocks
UMI non adjustable rear Control Arms
Stock front control arms
HR Sway Bar
Mickey Thompson 275 Pros
Guys thats it unless I left out a few little things here or there. Simple setup. Dan (Grumpy) has gone faster with less than this. There's no secret here. It runs 10's at 23psi of boost and will run 9's at 30+. I have had this combo for many years and I have tuned it slowly. If I could guess on a part that has made it live it would be the tune. It's never seen knock. Ever. This is on 100% pump gas and alcohol with FAST keeping everything in check.
Do I recommend this setup? It works but there are weak links. That's a choice I made way back. Do I wish there was a forged rotating assemble? Sure. Who wouldn't. Thank you guys for your time. Hope this thread was informative.
Last edited: