I was pulling one of the plugs off the ecm harness and 2 wires popped out of their sockets. Can anyone point me in the direction of a wiring diagram to correctly reinsert the wires? thank you
EDIT--- Have worked thru the diagrams and have all wires in the correct position, however now the car stumbles bad at idle and in drive forget about it.... its missing something awful as if only 5 cylinders are firing. NO codes... read on
When i got the wiring package back together i turned the car over and checked for codes, CODE41. Cam sensor fault so i turned the car off. checked the wiring harness and 2 wires werent all the way in the home position on the ecm. could they have touched? maybe.
The two wires in question are B12 Injector 5 and A11 CAM these two wires are neighbors in the ecm plug array. Sincevi had code 41 cam sensor fault thats why i went directly to the A11 to inspect. After I cleared all that up the car still runs really rough.
EDIT--- Have worked thru the diagrams and have all wires in the correct position, however now the car stumbles bad at idle and in drive forget about it.... its missing something awful as if only 5 cylinders are firing. NO codes... read on
When i got the wiring package back together i turned the car over and checked for codes, CODE41. Cam sensor fault so i turned the car off. checked the wiring harness and 2 wires werent all the way in the home position on the ecm. could they have touched? maybe.
The two wires in question are B12 Injector 5 and A11 CAM these two wires are neighbors in the ecm plug array. Sincevi had code 41 cam sensor fault thats why i went directly to the A11 to inspect. After I cleared all that up the car still runs really rough.
Last edited: