You can type here any text you want

Code 37 on the TR6

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

turbo nasty

Turbo Dojo / MNTR
Joined
Jul 19, 2001
Messages
9,478
Gotta a code 37 from the TR6 on a friends GN. Contacted Bob and he states its a Noise code (he left that code out of the manual). We are going to check plugs and wires, etc.
Curious if any one else has had this issue?
 
In my simple mind, I would change the ECM as we are having to replace many of the 30+ year old original computers.

A GN ready for a road test yesterday, but would not start after warming it up?

Scanner showed a dozen codes, replaced the ECM and it runs again.
 
In my simple mind, I would change the ECM as we are having to replace many of the 30+ year old original computers.

A GN ready for a road test yesterday, but would not start after warming it up?

Scanner showed a dozen codes, replaced the ECM and it runs again.

To clarify, The TR6 itself kicks out codes seperate than the ecm (which is a FAST XFI and code trouble free). The tach pulses the code
 
Back
Top