Hey guys, I'm having some issues with my Alky control system. I was at the racing at the track when I noticed my AFR started going in the high 12's range on the SMG, I lifted off the throttle . So I did some test hits and noticed my LED on the Alky kit never changed from red to green. Assuming my pump was at fault I ordered a new pump and installed it, but that didn't solve the problem. My Scanmaster Boost reading is being pulled of the same MAP sensor as the Alky system. It's logging the correct boost, so I'm assuming the Alky system is receiving the correct signal.(we all know what assuming means). I have went through the lines and haven't found any leaks either. I'm at a loss... Any help would be appreciated.