wires are for security option
the ones on clip are there to prevent someone from popping the lock in because that will cause the alarm to activate
the ones on lock are to arm and disarm the system
the replacement locks are short style , you would need long style to retain the arming ring
if you put the short locks in you could reuse the clip with switch or use the one that comes with new locks
the security harness could be removed by unplugging at the bottom of door and remove the ground screw
as for the ring , well you cant install it so it wont be able to be used , if your security option hasnt been disabled if you lock the doors with the door switch and close the doors the alarm can be activated
if you open the door with a key (now without the plastic ring switch) it wont disarm security and you cant turn it off and alarm will go off .. horn will go off and headlamps will flash and will also prevent starting the car
you will need to get into the dash and remove the in line security fuses in the dash harness that are between the radio and the dash cluster