Can anyone post some pictures to show how the #1 position body bushings should be installed between the core support and the frame. I have an 87 GN that I bought partly dissasembled in the front after a small collision, and is all straightened out and ready for reassembly. I have the stock GM...
I just bought spindles from a 2wd 2000 blazer--they look to be correct, but I noticed that the piece that comes off the spindle for the tie rod ends to attach to are at a slightly different angle (when comparing the two different sides) Is this correct?? I hope this explanation makes sense, if...
I bought the front end rebuild kit along with new upper control arms, lower ball joints, lower control arm bushings, springs and shocks--all from G-body parts, and it turned out great--might as well do it all at once. If I could do it over, I would look for a knuckle/brake assembly from an...
Thanks Blues-49, you had said in another post that "A friend of mine is running 285 x 40s x 17 on his t type on torque thrusters with bfgs g force tires-fit perfect." Do you know which model torque thrust wheels he has, and any specifics on rim widths and back spacing? Thanks for your help--I...
I have been looking at the American Racing Torque Thrust M wheels--they have 17"x8" with 4.5" backspacing--can anyone tell me if I am on the right track with sizing? Is anyone running these wheels/can you post pic's/tire sizes--Thanks! Dave
The parts guy I spoke with today gave me a part #231127 clutch pack kit--but he said it is discontinued--is this correct--does anyone have any other leads for me??
does anyone know of a good kit available to rebuild the posi in a stock Grand National rear end?? I have it apart to replace the outer bearings and seals, so I am looking to do it all at one time--Thanks