Recent content by regalized

  1. R

    4.1 Buick Engine

    Is it complete, distributor etc, thanks, Tony.
  2. R

    My LS Swap 6.0/4l80e Twin turbo

    Great looking set up! Will the stock hood close on that manifold? Tony.
  3. R

    Bare 109 block needed.

    Hi Fred, my cell is (760) 500-4162. Many thanks, Tony.
  4. R

    Bare 109 block needed.

    Thanks for the reply, yes I am interested. I will find out next week if mine is workable. How much do you need for it and where are you, I'm in San Diego CA. Many thanks, Tony.
  5. R

    Bare 109 block needed.

    I have spun number 3 main in my stroker motor. It's at the machine shop now, waiting for the word if the block is toast! I'm in San Diego, please let me know if you can help me out. Many thanks, Tony.
  6. R

    Fuel Pressure

    Sorry, yes I do have a Volt booster.
  7. R

    Fuel Pressure

    Dash 8 to a large filter then a Y to dual feed the rear of the rails. Dual Dash 8 return into Magnafuel regulator, then I used the stock feed line with reversed filter as the return to the tank! I am going to add a small surge tank with the new Deatchwerks 350 E85 pump, the surge tank will be...
  8. R

    Fuel Pressure

    Turbo Lou Stroker, stock ported heads, 224/224 flat tappet Erson I believe. PTE 67/66 journal Turbo, E85, 120 lb injectors, versafueler,6.1 chip, single 430 pump 69 Mustang Moog front springs( nearly 6 inches of travel, stock rear springs, HR rear bar no front. Relocated upper adj, adj lower...
  9. R

    Short rebuilt block FS

    Where in So Cal are you, I'm in San Diego
  10. R

    What valve springs with 218-212 roller cam

    Could be something simple like spark blow out.
  11. R

    How Fast On 120s? (E85)

    6.88 @101, showed 65% duty cycle, about 22 lbs boost, 67/66 turbo. Single walbro 430. Lifted left front tire @ 7lb launch foot brake.
  12. R

    Bates Nut Farm car show 7 June 2015

    Tony Thompson- San Marcos- 86 GN. Nathan Thompson - Vista - 87 Limited (work permitting). Thanks so much for putting on a great show!
  13. R

    Fuel Pressure

    E85, 120 lb injectors, versafueler,6.1 chip, single 430 pump, I run 50 lb base line off. 21 psi boost. Last time at the 1/8 mile track ,idles great, 70% duty cycle, ran 6.88 at 100 mph. Lifted a wheel for the first time too. Couldn't be happier.
  14. R

    Injecting E85 fuel in charge pipe?

    Hi Z means high impedance, a stock ECM maxs out typically at 80lb injectors. You can have the stock ecm modified or buy a versafueler. Its a stand alone peak and hold "computer" so its a diy method of using low Z injectors. ID2000 are injector dynamic 2000 cc injectors.
  15. R

    Injecting E85 fuel in charge pipe?

    Great choice, very happy with my Versafueler and 120s.
Top