J Jason dcpt New Member Joined Sep 12, 2023 Nov 3, 2023 #1 Installing a dominator efi. Is there a way to do this without putting a degree wheel on the front of the engine?
Installing a dominator efi. Is there a way to do this without putting a degree wheel on the front of the engine?
TType85 Well-Known Member TurboBuick.Com Supporter! Joined May 25, 2001 Nov 3, 2023 #2 Is it a stock balancer? You can use some tape and measure it out. Length in inches = (degrees / 360) x (3.1416 x balancer diameter) 60deg on a stock balancer would be (60 / 360) * (3.1416 * 6.82) = 3.57 inches Other balancers diameters are different.
Is it a stock balancer? You can use some tape and measure it out. Length in inches = (degrees / 360) x (3.1416 x balancer diameter) 60deg on a stock balancer would be (60 / 360) * (3.1416 * 6.82) = 3.57 inches Other balancers diameters are different.
TType85 Well-Known Member TurboBuick.Com Supporter! Joined May 25, 2001 Nov 3, 2023 #4 I would measure it and plug the numbers in and see what you get
J Jason dcpt New Member Joined Sep 12, 2023 Nov 3, 2023 #6 Your math was dead on and I contacted Don for confirmation. And with a bhj balancer its 3.25