The dashboard does have both and they are say 2.81 raw and the cts indicates single digit temps or 0. The indicator does not move from the far right.
I found that file and did that a few days ago but if you like i will try it again. Bias still set at 2.2 on both graphs.Try this:
File/ Paste from a File/ Temp Sensors/GM Temp Sensor Cals.ict
Sent from my SM-N960U1 using Tapatalk
After this success, I looked at other parameters and now the map calibration table is pegged a 315 so idle AF is 10.3. I have tried loading different 3 bar graphs but didnt help. Can a virus be a problem to this program?Possibly. But at least it's fixed
Sent from my SM-N960U1 using Tapatalk
I Loaded the fast 3 bar map but from a different laptop and it suddenly had the voltage to match the raw map voltage. Just thought I would share that tid bit. Maybe now I can play with tuning. Thanks for the motivation.It sounds like you have a 1 bar MAP sensor ot the calibration is wrong
Sent from my SM-N960U1 using Tapatalk