Here is what I have:
WOT Boost- 10 PSI
Fuel Pressure at idle- 38 PSI, Vacuum hose on
Fuel Pressure at WOT- 58 PSI
0 knock (ScanMaster)
TA 49 turbo
42.5# injectors
TT alky chip
Here is what I did before these readings:
Adjusted the Wastegate; started out all the way with no boost, adjusted the actuator by shortening the rod, first had 4 PSI boost, then shortened more and got 8 PSI boost, then shortened more (all the way) 15 PSI boost
The actuator was adjusted as far in as it could go- it looked parallel with the exhaust connection. I knew this should have been too much boost.
Is my boost gauge working right? What's wrong? Thanks for any help you can throw my way.
WOT Boost- 10 PSI
Fuel Pressure at idle- 38 PSI, Vacuum hose on
Fuel Pressure at WOT- 58 PSI
0 knock (ScanMaster)
TA 49 turbo
42.5# injectors
TT alky chip
Here is what I did before these readings:
Adjusted the Wastegate; started out all the way with no boost, adjusted the actuator by shortening the rod, first had 4 PSI boost, then shortened more and got 8 PSI boost, then shortened more (all the way) 15 PSI boost
The actuator was adjusted as far in as it could go- it looked parallel with the exhaust connection. I knew this should have been too much boost.
Is my boost gauge working right? What's wrong? Thanks for any help you can throw my way.