crank sensor install help

[gn79]

I replaced the stock timing cover and now I need help with the crank sensor. Does the sensor go on with two sturds or is it just one. The porblem is that I only put one sturd on which is the bottom one. I cannot get the sensor to sit fush. THe balancer blades will hit the sensor blacket. So now I am stuck. Can someone that knows help me out.

 

[Russ Merritt]

The bottom one is a stud, the top is a bolt. The stud acts like a bolt though and is there to hold the bracket for the I/C. So put the sensor on then bolt it down with the bolt on top, stud on the bottom.

 

[gn79]

Ok, so the barket sits fush on the timing cover right. Its bolted to the timing cover with the bolt on top and bolted with the stud on the bottom. Thank you very much. I have been miss with the sensor and day. The cam sensor is all ready in and set so now this is the last part to fire up the car and begin use.