Have you tried cutting out the section that is rubbing?
Yeah, but w/ the spindles and springs they compression rub almost like the diam is too large, but they are 26" still, and only 245/35s. I was considering essentially cutting the whole top out and still having essentially walls to block grime and water. I am just real low.
20x8.5 w/ 5.25 BS and 7/16 wheel spacer, 245/35-20. I got the wheel out a bit, I even trimmed out the fender lips to the trim screws. With 2" drop spindles and 1"+ drop springs and 8.5" wide, something was bound to rub.....most ppl that go real low run 7"-8" wide.What is the rim size and backspacing on your front rims?
I had to drop down to a 235 on front to solve my rubbing issues. I didn't have the heart to cut on my car.
Rob
20x8.5 w/ 5.25 BS and 7/16 wheel spacer, 245/35-20. I got the wheel out a bit, I even trimmed out the fender lips to the trim screws. With 2" drop spindles and 1"+ drop springs and 8.5" wide, something was bound to rub.....most ppl that go real low run 7"-8" wide.
Silver Fox were are you in Ohio?