muddin'metal
Active Member
- Joined
- Feb 4, 2008
I have a set of 6 0.30 stock replacement Venolia forged pistons for a production 4.1 block (3.995 bore). These are installed on two dot turbo rods, no need to pay the machine shop. These should yield 8.0-8.5:1 compression with stock or Felpro 1000 gasket.
From previous owmer: "Rods have no damage to them at all. Honestly these pistons have less than 500 miles on them if that. I bought them new from Venolia 4 yrs ago. They have about 20-30 track passes on them. The only reason I'm selling them is last time at the track I blew a head gasket and as many of you know the thin deck has completely cracked into the water jacket. So the block is no good. As far as the skirts are concerned only one piston has any significant wear. I think the pics are self explanatory. I would not hesitate to re-use these myself."
Personally I would replace the one piston and pin that shows signs of severe detonation (the wrist pin is even tight). I contacted Venolia and one new piston is $160.
$425 shipped. Thank you, Tyler (256) 7three8-0471
Last edited: