Fuel Line

turbolc2

Mongoose
Joined
May 25, 2001
Has someone used a braided teflon fuel line from tank to fuel rail? What "an" size was used? I'm convinced that the stock fuel feed line is quite restrictive.A "hotwired" 340 will be used.
 
tubeaarm2.JPG

i just ran, an fittings from the frame rail to the engine
 
I believe with the fuel feed tight bends around the drivers side frame rail by the drivers left foot a single pump is fighting unecessary flow restriction. I'm sure a lot of cars have gone 9's on the stock fuel lines with multiple pumps.I'm looking to reduce the flow restriction for a single pump.
 
fuel lines

turbolc2 said:
Has someone used a braided teflon fuel line from tank to fuel rail? What "an" size was used? I'm convinced that the stock fuel feed line is quite restrictive.A "hotwired" 340 will be used.

My car is fed with -10 AN from two pumps (not in-tank). I have also seen -12 AN used in the same application. I have no fuel delivery problems at all.

MSA
 
Top