What my problem is, is I keep blowing the fuse for the fuel pump in the fuse panel. I had a hotwire kit and since replaced it thinking that was the problem. It is still blowing. The hotwire fuse is fine. I replaced the fuel pump and it is still blowing. I went from a 15amp to a 30amp and it still blows the 30amp. The stock connection goes into the hotwire kit so I snipped the stock power (red) thinking there is a short in that and it still blows. The new hotwire kit is fully grounded and connect to the altn........what could it be, it sucks cause....well I can't even start the car. Please help, what to try next....there is 2 more wires from the stock line, I think one is ground and one is from the ECM..............