hard to start, WHY!

[Goldberg]

I am having a hard time getting my GN to start in the mornings. It cranks fine, but I have to give it a little throttle to get it to fire up and run.

I just replaced the ign module (nos4gn) because it was backfiring and bucking badly until it warmed up. It does not do this anymore but it still is hard to start.

Any ideas?

Thanks
Matt

 

[ESP Products]

Your IAC motor may be sticking. Ground the ALDL, key on, wait 15-20 seconds, unplug IAC, key-off, and un-ground. Remove the IAC and clean it. When installing follow the usual Min. Air Procedure.

Hope this helps.