help! leaving for a trip wednesday and car is all messed up

[trbo6gn]

ok here is the deal. when i start to build boost it builds very slow to about 10 pounds and when it gets to that 10 lbs. it starts to buck and feels as though it is hitting the revv limiter. almost as though it is cutting out on me. someone told me it could possibly be a bad chip. any ideas and if soo can i just put back in the stock chip with the 009 injectors for the 4 days that i will be on my triP?

 

[trbo6gn]

TTT anyone?

 

[BLACK6PACK]

What kind of readings are you getting from your scan tool when this happens?

 

[Intercooler]

MAF or fouled plugs.

 

[V8KILLR]

BLACK6PACK,
No scan tool at this time........Ryan knows he needs one bad, but does not have it now. My computer in down, so the T-link has no computer to run on or I'd drive up to his place to help.

Jason

 

[V8KILLR]

Maybe the wires. They may have been burned up by the headers and are now arcing.

Jason

 

[tim87tr]

Connect the upper right two ADL pins with a wire, turn the ignition on, and you can check for any stored codes. Codes and fixes listed on gnttype.org

 

[Mease Performance]

problem

I can possibly give Jason another chip wednesday when he picks his car up here. Let me know what your setup is and if you have found anything else.

Here to help, <KM@>MPE

 

[trbo6gn]

hey keith i just talked to jason and whatever help you would give me i would appreciate it and lets just say i would owe you big. thanks alot
ryan